2021 ONE RR

Its innovative design with asymmetric shapes, maintains the DNA of the brand, present on the GOLD and One R 2021 models that have preceded it.

The engine has been completely redesigned, in order to fit the new aluminum injection-cast crankcases, substantially improving the finishes and achieving better behavior at low-speed increasing pre-compression.

The new clutch cover with sight glass for oil level and filling, all on the same side, facilitates maintenance.

The incorporation of a temperature sensor makes it possible to control even better, on the one hand, thermal variations and, on the other, the optimal starting point of the fan controlled by the new CDI.

The ONE RR establishes itself as a benchmark motorcycle, both for the user and for the most top riders.

Regarding the ONE RR 125´s engine, significantly improved, its new crankshaft, piston and cylinder head provide a considerable increase in terms of power, as well as reduced vibrations.

In this case, the final development 8-45 has also been reduced, with which a better response and optimum use of the first three gears is achieved.

The new ONE RR, like rest of the Brand´s models, will be available in two versions:

Normal: 300 - 280 - 250 - 125 cc.

With electric start: 300 - 280 - 250 cc.

New: 250-280-300 cc.
1. Aluminum injection crankcases.
   a. Pre compression is increased in the crankcases providing more power at low revs. 
   b. Relocation of the motor evaporator.
   c. Carburetor evaporator with guided hose.
   d. New outside crank cases treatment. Reduces aging. 
2. Clutch cover with oil sight glass and oil fill cap. 
3. Cylinder head cover with temperature sensor.
4. Updated ignition cover.

New: 125 cc.
1. New piston.
2. Reinforced and more compressed inner cylinder head.
3. Cylinder head cover with temperature sensor.
4. Long thread spark plug.
5. Crankshaft assembly. More power and better balanced.
6. Updated ignition cover. 
7. "Clutch cover with oil sight glass and oil filler cap"

INTEGRAL PART

New: 250-280-300 cc.
1. Electrical installation for temperature sensor. "It increases the precision and reliability of the cooling system."
2. New CDI for temperature sensor reader.
3. New filter box deflector. 
4. Improved filter box drainage.
5. Reinforced link and rocker link.
6. Lightened engine support. Improves assembly and reduces vibrations.
7. Improved fixing and robustness of the exhaust exit pipe.
8. Forging front exhaust bracket. 
9. Front brake disc protector. It complies with the FIM standard and is more resistant to impacts.
10. Frame. Dimensional improvements. Improves assembly and tensions.
11. Improved fixation on the chain guide.
12. Curved silicone water tube. To avoid interference with fan.
13. Wheels. Red anodized rims.
14. New handlebar. New decoration.
15. Gray swingarm.
16. New decoration.

New (125 cc):
1. New secondary transmission. 8z pinion and 45z rear sprocket Improves torque at low revs and reduces sprocket size reducing the risk of impacts.
2. Electrical installation for temperature sensor. "It increases the precision and reliability of the cooling system."
3. New CDI for temperature sensor reader.
4. New filter box deflector.
5. Improved filter box drainage.
6. Reinforced link and rocker link.
7. Lightened engine support. Improves assembly and reduces vibrations.
8. Improved fixing and robustness of the exhaust exit pipe.
9. Forging front exhaust bracket. 
10. Front brake disc protector. It complies with the FIM standard and is more resistant to impacts.
11. Chassis. Dimensional improvements. Improved assembly.
12. Improved fixation on the chain guide.
13. Wheels. Red anodized rims.
14. New handlebar. New decoration.
15. Gray swingarm.

16. New decoration.

ENGINE:

New: 250-280-300 cc.

1. Aluminum injection crankcases.

a. Pre compression is increased in the crankcases providing more power at low revs. 

b. Relocation of the motor evaporator.

c. Carburetor evaporator with guided hose.

d. New outside crank cases treatment. Reduces aging. 

2. Clutch cover with oil sight glass and oil fill cap. 

3. Cylinder head cover with temperature sensor.

4. Updated ignition cover.

New: 125 cc:

1. New piston.

2. Reinforced and more compressed inner cylinder head.

3. Cylinder head cover with temperature sensor.

4. Long thread spark plug.

5. Crankshaft assembly. More power and better balanced.

6. Updated ignition cover. 

7. "Clutch cover with oil sight glass and oil filler cap"